Ankle Weights

• The gauge case is made from nickel plated brass
• The dial window is made of highly shock resistant material (anti-splinter polycarbonate)
• A specially designed housing protects the gauge and HP hose fitting from accidental damage
• A large loop area designed into the housing allows for easy attachment.
• There is an over-pressure capsule fitted in the back of the module to prevent the screen from exploding in the unlikely event of the internal mechanism failing.
• Dials have a long phosphorescent effect for better reading in poor visibility conditions
• There are 2 attachment areas integrated into the design for position flexibility
• This may be a compact design but the displays are vivid and clear - perfect for diving. For example, the depth gauge spreads the first half of the scale and in total shows a range down to 70 m
• Depth gauge has resettable max depth indicator
• A specific O2 clean version is available for use with high percentage oxygen gases

This high-performance regulator boasts a balanced first stage coupled with a pneumatically balanced second stage. The smooth, quiet breath is sure to enhance your diving enjoyment. Designed for water temps above 50°F / 10°C. The Comfo-bite™ mouthpiece, with its patented bridge, virtually eliminates jaw-fatigue. Compatible with EAN40 out of the box.

First Stage: The first stage is a balanced diaphragm type that offers consistent performance from start of dive until end of dive, regardless of depth. 1 HP port and 4 MP ports are available.  Available in yoke only.

Second Stage: Pneumatically-balanced second stage results in smooth, easy breathing. The large purge button on the AT20 is easy to operate even with thick gloves. The integrated venturi control provides a performance boost at depth while preventing unwanted freeflow at the surface. An extremely efficient exhaust valve improves the breathing performance of the regulator.  The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue.  Offers a compact, integrated exhaust tee.

Free Parts for Life Program (Regulator Service Agreement)

The Free Parts for Life Program allows the customer to receive free parts when the regulator is due for overhaul. Free parts consist of the normal replacement items as found in the Regulator 1st & 2nd Stage Service Kits. Labor charges are not covered. Assuming the program guidelines are followed, the Free Parts for Life Program will apply to the life of the regulator and will significantly reduce the cost of ownership. This program is in addition to the standard product warranties outlined in the owner’s manual. The Free Parts for Life Program is a commitment by you (the Regulator owner), your Aqua Lung Dealer and Aqua Lung. To participate, you must be the original owner and have purchased the regulator from an Authorized Aqua Lung or Apeks America Dealer. The regulator must be brought to an Authorized Dealer at least once a year for inspection or overhaul according to the below schedule:

Year #1: Inspection

Year #2: Overhaul

Year #3: Inspection

Year #4: Overhaul

Etc.

To keep the Free Parts for Life Program active, both inspections and overhauls need to be documented in the Annual Service & Inspection Record included in the Owner’s Manual CD or the Record can be found online. If an inspection or overhaul is missed, the regulator no longer qualifies for the Free Parts for Life program. Visit Water World SCUBA, your local Aqua Lung dealer, for more information.

This high-performance regulator boasts an over-balanced first stage coupled with a pneumatically balanced second stage. The smooth, quiet breath is sure to enhance your diving enjoyment. Suitable for coldwater use thanks to its first stage environmental dry seal and second stage heat exchanger. Compatible with EAN40 out of the box.

First Stage: Uses the DS4 first stage. Unique over-balanced, diaphragm design - as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a rate faster than ambient. This results in superior performance at depth. 1 HP port and 4 MP ports are available. An environmental dry system keeps water out of the main spring chamber thus preventing ice buildup and keeping silt and contamination out.

Second Stage: Pneumatically-balanced second stage results in smooth, easy breathing. The large purge button on the ATX is easy to operate even with thick gloves. The integrated venturi control provides a performance boost at depth while preventing unwanted freeflow at the surface. An extremely efficient exhaust valve improves the breathing performance of the regulator. The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue. A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water. Offers a compact, integrated exhaust tee.

Free Parts for Life Program (Regulator Service Agreement)

The Free Parts for Life Program allows the customer to receive free parts when the regulator is due for overhaul. Free parts consist of the normal replacement items as found in the Regulator 1st & 2nd Stage Service Kits. Labor charges are not covered. Assuming the program guidelines are followed, the Free Parts for Life Program will apply to the life of the regulator and will significantly reduce the cost of ownership. This program is in addition to the standard product warranties outlined in the owner’s manual. The Free Parts for Life Program is a commitment by you (the Regulator owner), your Aqua Lung Dealer and Aqua Lung. To participate, you must be the original owner and have purchased the regulator from an Authorized Aqua Lung or Apeks America Dealer. The regulator must be brought to an Authorized Dealer at least once a year for inspection or overhaul according to the below schedule:

Year #1: Inspection

Year #2: Overhaul

Year #3: Inspection

Year #4: Overhaul

Etc.

To keep the Free Parts for Life Program active, both inspections and overhauls need to be documented in the Annual Service & Inspection Record included in the Owner’s Manual CD or the Record can be found online. If an inspection or overhaul is missed, the regulator no longer qualifies for the Free Parts for Life program. Visit Water World SCUBA, your local Aqua Lung Dealer, for more information.

Unique over-balanced diaphragm design – as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a faster rate than ambient. This results in superior performance at depth. Compact environmentally dry sealed diaphragm system completely eliminating the maintenance issues associated with silicone, oil or grease filling. Break through, innovative over-molded first-stage endcap & environmental diaphragm helps prevent ice build-up that can cause first stage free flow in extreme circumstances. Also protects the first stage from impact damage. Easy to grip DIN hand-wheel or over-molded yoke hand-wheel, only requires one hand to release. DIN, Yoke and M26 Thread available, 300bar, 232bar and M26 300bar (O2) respectively. 5 x 3/8” UNF (Unified National Fine) medium pressure ports. 2 x 7/16” UNF high pressure ports. The 5th 3/8” UNF medium pressure port includes a protective bumper when not in use. Forged first stage body with heat exchanging ribs for maximum thermal performance. Angled HP ports for optimal hose routing and fitting of transmitters. Forged rotating turret with medium pressure ports in a parallel direction for improved hose orientation. Ribbed diaphragm clamp for improved heat exchange in cold water conditions. Double swivel hose for greater freedom of movement and comfort. Tested for Octopus use - EN250A to 60 meters cold water. Nitrox/Oxygen compatible – Up to 40% O2 outside the EU (European Union), within the EU anything above 21% O2 must use an M26 Connection. Simple to use with no dive adjustment controls and reduced chance of free flow occurrence, pre-settable cracking effort or venturi control by an Apeks approved qualified technician. High performance pneumatically balanced lever operated poppet valve. Large, diver friendly self-flushing controllable purge button. Front cover with over-molded elastomer incorporates a formed chrome plated brass plate improving durability of the second stage. Large protective elastomer bumpers on the side and on the top to protect the second stage from impacts and scratches in the most vulnerable places. Reversible second stage for either a left or right hand gas supply configuration. A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water. Removable bungee necklace with lock out feature for retaining second stage in the mouth of an unconscious diver during rescue and to assist with jaw fatigue. Comfo-bite mouthpiece. Flexible nylon braided hose has better cold water performance than traditional rubber hose. Simple service kits. Easy to service. Color coded octopus hose.

Free Parts for Life Program (Regulator Service Agreement)

The Free Parts for Life Program allows the customer to receive free parts when the regulator is due for overhaul. Free parts consist of the normal replacement items as found in the Regulator 1st & 2nd Stage Service Kits. Labor charges are not covered. Assuming the program guidelines are followed, the Free Parts for Life Program will apply to the life of the regulator and will significantly reduce the cost of ownership. This program is in addition to the standard product warranties outlined in the owner’s manual. The Free Parts for Life Program is a commitment by you (the Regulator owner), your Aqua Lung Dealer and Aqua Lung. To participate, you must be the original owner and have purchased the regulator from an Authorized Aqua Lung or Apeks America Dealer. The regulator must be brought to an Authorized Dealer at least once a year for inspection or overhaul according to the below schedule:

Year #1: Inspection

Year #2: Overhaul

Year #3: Inspection

Year #4: Overhaul

Etc.

To keep the Free Parts for Life Program active, both inspections and overhauls need to be documented in the Annual Service & Inspection Record included in the Owner’s Manual CD or the Record can be found online. If an inspection or overhaul is missed, the regulator no longer qualifies for the Free Parts for Life program. Visit Water World SCUBA, your local Aqua Lung Dealer, for more information.

The TEK3 utilizes all of the proven technology contained within the Apeks range of first stage regulators. The ports on the TEK3 first stages are oriented so that all hoses will route downward to provide the streamlined configuration required by technical divers. Allows unrestricted accessibility to the cylinder valves when using a twin cylinder set up. Features an innovative Diver Changeable Exhaust system (DCE). The system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice, wider exhaust tee for minimal bubble interference (essential for underwater photography) and narrow exhaust tee for a smaller compact comfortable regulator. The regulator is supplied with both sets of exhaust tees. The second stages can be converted from a right-handed hose configuration to a left-handed configuration. The process of changing the regulator to a left-handed configuration is both quick and simple. However this procedure must ONLY be performed by an APEKS Authorised Service Technician. Available with DIN connection only. Outstanding cold water performance (below 10 C / 50 F). Compatible with EAN40 out of the box.

First Stage: Compact, solid one-piece body. Unique over-balanced, diaphragm design - as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a rate faster than ambient. This results in superior performance at depth. 1 HP port and 3 MP ports are all angled downward. An environmental dry system keeps water out of the main spring chamber thus preventing ice buildup and keeping silt and contamination out. Maximum working pressure is 300 BAR (4350 psi).

Second Stage: Pneumatically-balanced second stage results in smooth, easy breathing. The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used - press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the center for the full effect of the purge, i.e. when regulator clearing etc. The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation. Easy-to-grip opening effort control knob keeps the diver in control. The second stage is manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mold, yeast and algae. A silicone exhaust valve improves the breathing performance of the regulator. The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue. A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water.

Free Parts for Life Program (Regulator Service Agreement)

The Free Parts for Life Program allows the customer to receive free parts when the regulator is due for overhaul. Free parts consist of the normal replacement items as found in the Regulator 1st & 2nd Stage Service Kits. Labor charges are not covered. Assuming the program guidelines are followed, the Free Parts for Life Program will apply to the life of the regulator and will significantly reduce the cost of ownership. This program is in addition to the standard product warranties outlined in the owner’s manual. The Free Parts for Life Program is a commitment by you (the Regulator owner), your Aqua Lung Dealer and Aqua Lung. To participate, you must be the original owner and have purchased the regulator from an Authorized Aqua Lung or Apeks America Dealer. The regulator must be brought to an Authorized Dealer at least once a year for inspection or overhaul according to the below schedule:

Year #1: Inspection

Year #2: Overhaul

Year #3: Inspection

Year #4: Overhaul

Etc.

To keep the Free Parts for Life Program active, both inspections and overhauls need to be documented in the Annual Service & Inspection Record included in the Owner’s Manual CD or the record can be found online. If an inspection or overhaul is missed, the regulator no longer qualifies for the Free Parts for Life program. Visit Water World SCUBA, your local Aqua Lung Dealer, for more information.

Features an innovative Diver Changeable Exhaust system (DCE). This system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice, wider exhaust tee for minimal bubble interference (essential for underwater photography) and narrow exhaust tee for a smaller compact comfortable regulator. The regulator is supplied with both sets of exhaust tees. An optional 5th port is available which features the additional bonus of an integrated heat exchanger (available on the Tungsten, XTX200 and XTX100 first stages). Can be converted from a right-handed hose configuration to a left-handed one. The process of changing the regulator to a left-handed configuration is both quick and simple. However this procedure must ONLY be performed by an APEKS Authorised Service Technician. Available in yoke or DIN configuration. Braided flexi-hoses are now standard on all models. These hoses are lighter weight, more flexible and more durable. Suitable for coldwater use (below 10 C / 50 F). Compatible with EAN40 out of the box.

First Stage: FSR style first stage. Highly polished bright chrome plating. Compact one piece body. 4 angled medium pressure ports, 4 x 3/8” UNF. 2 angled high pressure ports, 2 x 7/16” UNF. Optional 5th port. Removable ARCAP valve seat. Unique over-balanced, diaphragm design - as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a rate faster than ambient. This results in superior performance at depth. An environmental dry system keeps water out of the main spring chamber thus preventing ice buildup and keeping silt and contamination out

Second Stage: Pneumatically-balanced second stage results in smooth, easy breathing. The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used - press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the center for the full effect of the purge, i.e. when regulator clearing etc. The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation. Easy-to-grip opening effort control knob keeps the diver in control. The second stage is manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mold, yeast and algae. A silicone exhaust valve improves the breathing performance of the regulator. The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue. A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water.

Free Parts for Life Program (Regulator Service Agreement)

The Free Parts for Life Program allows the customer to receive free parts when the regulator is due for overhaul. Free parts consist of the normal replacement items as found in the Regulator 1st & 2nd Stage Service Kits. Labor charges are not covered. Assuming the program guidelines are followed, the Free Parts for Life Program will apply to the life of the regulator and will significantly reduce the cost of ownership. This program is in addition to the standard product warranties outlined in the owner’s manual. The Free Parts for Life Program is a commitment by you (the Regulator owner), your Aqua Lung Dealer and Aqua Lung. To participate, you must be the original owner and have purchased the regulator from an Authorized Aqua Lung or Apeks America Dealer. The regulator must be brought to an Authorized Dealer at least once a year for inspection or overhaul according to the below schedule:

Year #1: Inspection

Year #2: Overhaul

Year #3: Inspection

Year #4: Overhaul

Etc.

To keep the Free Parts for Life Program active, both inspections and overhauls need to be documented in the Annual Service & Inspection Record included in the Owner’s Manual CD or the Record can be found online. If an inspection or overhaul is missed, the regulator no longer qualifies for the Free Parts for Life program. Visit Water World SCUBA, your local Aqua Lung Dealer, for more information.

Green and yellow cosmetic pieces clearly identify that this regulator is dedicated for high-percentage oxygen use. The compact DS4 first stage has four medium-pressure ports and one high-pressure port (it does not feature the rotating turret found on the DST first stage). Features an innovative Diver Changeable Exhaust system (DCE). This system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice, wider exhaust tee for minimal bubble interference (essential for underwater photography) and narrow exhaust tee for a smaller compact comfortable regulator. Only the narrow exhaust tee is supplied with the regulator. Can be converted from a right-handed hose configuration to a left-handed one. The process of changing the regulator to a left-handed configuration is both quick and simple. However, this procedure must ONLY be performed by an APEKS Authorised Service Technician. Available in DIN configuration only. A braided flexi-hose comes standard. These hoses are lighter weight, more flexible and more durable. Suitable for coldwater use (below 10 C / 50 F). This regulator is suitable for use with up to 100% oxygen.

First Stage: DS4 first stage. Unique over-balanced, diaphragm design - as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a rate faster than ambient. This results in superior performance at depth. 1 HP port and 4 MP ports are angled for optimum hose routing. An environmental dry system keeps water out of the main spring chamber thus preventing ice buildup and keeping silt and contamination out.

Second Stage: Pneumatically-balanced second stage results in smooth, easy breathing. The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used - press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the center for the full effect of the purge, i.e. when regulator clearing etc. The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation. Easy-to-grip opening effort control knob keeps the diver in control. The second stage is manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mold, yeast and algae. A silicone exhaust valve improves the breathing performance of the regulator. The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue. A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water.

Free Parts for Life Program (Regulator Service Agreement)

The Free Parts for Life Program allows the customer to receive free parts when the regulator is due for overhaul. Free parts consist of the normal replacement items as found in the Regulator 1st & 2nd Stage Service Kits. Labor charges are not covered. Assuming the program guidelines are followed, the Free Parts for Life Program will apply to the life of the regulator and will significantly reduce the cost of ownership. This program is in addition to the standard product warranties outlined in the owner’s manual. The Free Parts for Life Program is a commitment by you (the Regulator owner), your Aqua Lung Dealer and Aqua Lung. To participate, you must be the original owner and have purchased the regulator from an Authorized Aqua Lung or Apeks America Dealer. The regulator must be brought to an Authorized Dealer at least once a year for inspection or overhaul according to the below schedule:

Year #1: Inspection

Year #2: Overhaul

Year #3: Inspection

Year #4: Overhaul

Etc.

To keep the Free Parts for Life Program active, both inspections and overhauls need to be documented in the Annual Service & Inspection Record included in the Owner’s Manual CD or the Record can be found online. If an inspection or overhaul is missed, the regulator no longer qualifies for the Free Parts for Life program. Visit Water World SCUBA, your local Aqua Lung Dealer, for more information.

 The set contains: 2 ea. XTX50 DIN regulators with 5 port swivel turrets. One XTX50 has a 83” / 210cm hose. One XTX50 has a 24” / 60cm hose. 2 ea. custom length MP inflation hoses (one for buoyancy system, one for drysuit). 2 ea. brass pressure gauges with 6 inch hoses (units in PSI). 1 ea. 90° elbow fitting, 1 ea. bungee necklace, 1 ea. stainless steel clip, 2 sets of short exhaust ports. Regulator bag to hold all. Setup illustration, CD manual and quick start guide. The Apeks Sidemount Regulator Kit is the first CE approved sidemount kit specifically for this type of diving.

First Stage: Unique over-balanced, diaphragm design - as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a rate faster than ambient. This results in superior performance at depth. An environmental dry system keeps water out of the main spring chamber thus preventing ice buildup and keeping silt and contamination out.

Second Stage: Pneumatically-balanced second stage results in smooth, easy breathing. The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used. Press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the center for the full effect of the purge, i.e. when regulator clearing etc. The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation. Easy-to-grip opening effort control knob keeps the diver in control The 2nd stage is manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mold, yeast and algae. A silicone exhaust valve improves the breathing performance of the regulator. The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue. A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water.

Free Parts for Life Program (Regulator Service Agreement)

The Free Parts for Life Program allows the customer to receive free parts when the regulator is due for overhaul. Free parts consist of the normal replacement items as found in the Regulator 1st & 2nd Stage Service Kits. Labor charges are not covered. Assuming the program guidelines are followed, the Free Parts for Life Program will apply to the life of the regulator and will significantly reduce the cost of ownership. This program is in addition to the standard product warranties outlined in the owner’s manual. The Free Parts for Life Program is a commitment by you (the Regulator owner), your Aqua Lung Dealer and Aqua Lung. To participate, you must be the original owner and have purchased the regulator from an Authorized Aqua Lung or Apeks America Dealer. The regulator must be brought to an Authorized Dealer at least once a year for inspection or overhaul according to the below schedule:

Year #1: Inspection

Year #2: Overhaul

Year #3: Inspection

Year #4: Overhaul

Etc.

To keep the Free Parts for Life Program active, both inspections and overhauls need to be documented in the Annual Service & Inspection Records included in the Owner’s Manual CD or the Records can be found online. If an inspection or overhaul is missed, the regulator no longer qualifies for the Free Parts for Life program. Visit Water World SCUBA, your local Aqua Lung Dealer, for more information.

1st stage: The Calypso is compact, easy to pack and easy to store. High-Flow Piston Technology ensures great performance and excellent reliability. The large-diameter piston gives you more stable pressure out. Intuitive Design: Designed with large holes in end caps for easy cleaning and better thermal exchange and improved resistance to freezing. Second Filter: Includes a second filter, which can be change without dismantling and provides increased protection from polluted air. Open-yoke screw helps prevent water retention. Protects Against Shocks: The dust cap adjacent to the body protects the yoke inlet fittings against shocks.

2nd stage: Comfo-Bite mouthpiece is soft yet sturdy and reduces jaw fatigue with its unique palate bridge. Reusable Clip: Perform quick and easy mouthpiece changes using the removable, reusable clip. Venturi Knob Easy control: the in-line ergonomic Venturi knob lets you make precise adjustments, even while wearing gloves. Polyurethane Purge Cover: Rugged, durable polyurethane purge cover is abrasion-resistant, tear-resistant, minimizes inhalation effort, allows easy water purging, and helps protect against shock. Prevents Freeflow: Side openings prevent freeflow when facing into currents or riding a scooter. Easy Maintenance: Simple maintenance made possible by a reduced number of components and easy access to the exhaust valve through a clipped deflector. Deflector also splits up bubbles to decrease noise and protect the valve from expiration.

Free Parts for Life Program (Regulator Service Agreement)

The Free Parts for Life Program allows the customer to receive free parts when the regulator is due for overhaul. Free parts consist of the normal replacement items as found in the Regulator 1st & 2nd Stage Service Kits. Labor charges are not covered. Assuming the program guidelines are followed, the Free Parts for Life Program will apply to the life of the regulator and will significantly reduce the cost of ownership. This program is in addition to the standard product warranties outlined in the owner’s manual. The Free Parts for Life Program is a commitment by you (the Regulator owner), your Aqua Lung Dealer and Aqua Lung. To participate, you must be the original owner and have purchased the regulator from an Authorized Aqua Lung or Apeks America Dealer. The regulator must be brought to an Authorized Dealer at least once a year for inspection or overhaul according to the below schedule:

Year #1: Inspection

Year #2: Overhaul

Year #3: Inspection

Year #4: Overhaul

Year #5: Etc.

To keep the Free Parts for Life Program active, both inspections and overhauls need to be documented in the Annual Service & Inspection Record included in the Owner’s Manual CD or the Record can be found online. If an inspection or overhaul is missed, the regulator no longer qualifies for the Free Parts for Life program. Visit Water World SCUBA, your local Aqua Lung Dealer, for more information.

Pressure Gauge

The Aqua Lung Pressure Gauge delivers both remaining air pressure and temperature in one easy-to-read display.

• Easy-to-read scale up to 5,000 PSI / 350 bar rated
• Luminescent gauge face for easy reading in low light
• Integrated temperature scale
• Nitrox compatible up to 50%
• Swiss made, shock resistant Bourdon tube
• One way safety valve
• Hose length is 36"/ 91.44cm

Depth Gauge

The Aqua Lung Depth Gauge, with its specially designed depth scale and luminescent gauge face, allows for easier reading at a glance.

• High fidelity depth scale provides accurate and easier reading at shallow depths
• Maximum depth indicator
• Luminescent gauge face for easy reading in low light
• 200 foot / 60 meter maximum depth
• Wrist mount boot allows for future upgrade to the i300 dive computer module

Options:

• Available in imperial or metric

Wrapture™ Harness System:

Wrapture™ Harness System: patented swivel shoulder buckles and ultra-thin back plate provide unsurpassed comfort and prevent the BCD from riding up on the surface. Out of the water, the system allows you to stand up straight by keeping the cylinder close to your center of gravity and transferring the weight to your hips.

GripLock™ Tank Band:

GripLock™ tank band’s finger-saver feature and macro presets create an easy and safe solution for securing and detaching your cylinder.

SureLock™ II Weight Release:

Safe, single-pull weight release with patented SureLock™ II Mechanical Weight Release System.

Additional Dump Option:

Right shoulder pull

Oral Inflator:

Easy-to-use pull-down oral inflator.

Bladder Retraction System:

Bladder retraction system pulls in the sides of the bladder during deflation to keep you streamlined and reduce drag.

Adjustable Chest Strap:

Adjustable sliding chest strap can be raised or lowered on a rail system for added comfort. Helps you avoid drysuit valves.

Smooth, Flat Valves:

Proprietary flat valves further reduce drag

Optional Instrument Configuration:

Some divers may find it useful to run their instruments behind the left pocket and out the scooped opening on the top front of the lobe.

Octo Storage:

Scooped octo pocket.

Gear Up!

Multiple pockets, D-rings, and knife attachment points make stowing and accessing gear easy.

Rolled Neck Collar:

Comfortable rolled neck collar.

Aqua Lung America warrants to the original purchaser for a period of time, specified below for each product, from the date of purchase that the product will be free from defects in materials and workmanship, provided that it receives normal use, proper care and prescribed dealer service subject to the limitations listed below. The limited warranty is extended only to the original purchaser for purchases made from an Authorized Aqua Lung America Dealer and is not transferable. This warranty is limited to repair or replacement only at the discretion of Aqua Lung America. Warranty coverage does not extend to damages caused by improper use, improper maintenance, neglect, unauthorized repairs, modifications, accidents, fire, casualty or normal wear and aging. Cosmetic damage(s), such as scratches, nicks and fraying are not covered under warranty except when the product is new, out of the original packaging. This warranty does not extend to equipment used for commercial or military purposes.

BCDs: Weld/Seam Leaks: Five-Year Limited Warranty *Qualifying Service Records Required".

           Hardware (Buckles, Zippers, D-Rings, etc.): Two-Year Limited Warranty

• Core Regulator

• 

  Discover the Core

• 

  Auto Closure Device (ACD)

• 

  Balanced First Stage

• 

  Pneumatically Balanced Second Stage

• 

  Comfobite Mouthpiece

• 

  Free Parts for Life Program

Wrapture™ Harness System:

Wrapture™ Harness System: patented swivel shoulder buckles and ultra-thin back plate provide unsurpassed comfort and prevent the BCD from riding up on the surface. Out of the water, the system allows you to stand up straight by keeping the cylinder close to your center of gravity and transferring the weight to your hips. 

SureLock™ II Weight Release:

Safe, single-pull weight release with patented SureLock™ II Mechanical Weight Release System.

ResisteK Material:

Looks good, and stays that way: made of new, technologically advanced ResisteK™ material to resist fading and abrasion in saltwater and chlorine.

HP Hose Routings:

HP hose routings through the back keep your entire kit low profile, minimizing drag. 

Smooth, Flat Valves:

Proprietary flat valves further reduce drag.

Bladder Retraction System:

Bladder retraction system pulls in the sides of the bladder during deflation to keep you streamlined and reduce drag.

Adjustable Chest Strap:

Adjustable sliding chest strap can be raised or lowered on a rail system for added comfort. Helps you avoid drysuit valves.

Additional Dump Option:

ight shoulder pull.

Gear Up!

Multiple pockets, D-rings, and knife attachment points make stowing and accessing gear easy.

Rolled Neck Collar:

Comfortable rolled neck collar.

Non-Ditchable Weight Pockets: Located on the back of the BCD, these pockets help you achieve proper positioning in the water.

Capacity:

All sizes of the Dimension are capable of holding up to 30lbs/13.5kg of lead weight.

BCDs: Aqua Lung America warrants to the original purchaser for a period of time, specified below for each product, from the date of purchase that the product will be free from defects in materials and workmanship, provided that it receives normal use, proper care and prescribed dealer service subject to the limitations listed below. The limited warranty is extended only to the original purchaser for purchases made from an Authorized Aqua Lung America Dealer and is not transferable. This warranty is limited to repair or replacement only at the discretion of Aqua Lung America. Warranty coverage does not extend to damages caused by improper use, improper maintenance, neglect, unauthorized repairs, modifications, accidents, fire, casualty or normal wear and aging. Cosmetic damage(s), such as scratches, nicks and fraying are not covered under warranty except when the product is new, out of the original packaging. This warranty does not extend to equipment used for commercial or military purposes.

Weld/Seam Leaks: Five-Year Limited Warranty *Qualifying Service Records Required

Hardware (Buckles, Zippers, D-Rings, etc.): Two-Year Limited Warranty

• Stay Connected After your dive, Bluetooth connectivity lets you share your stats, location, memories, and photos on social media via the free DiverLog+ app on your smartphone (for iOS and Android)
• Four Operating Modes Dive how you like with Air, Nitrox, Gauge dive modes, plus Free Dive (tracks calculations to allow switching between dive modes and free dive)
• User-Changeable Battery uses globally available standard batteries found at supermarkets and drugstores so you can easily replace as needed
• Intuitive Navigation Single-button access to last dive data (maximum depth and bottom time)
• Increased Safety Audible alarms and additional high-visibility LED warning light
• Updatable software User-updatable software gives you long-term access to the latest features and upgrades via Bluetooth connection
• History Mode History Mode lets you see your total dives, maximum depth, total dive hours, and lowest temperature. Records up to 24 dives
• Nitrox Mix Capability Up to 100% O2. Mix up to 2 Nitrox gases
• Deep Stop Optional deep stop with countdown timer

Features

• Stay Connected After your dive, Bluetooth connectivity lets you share your stats, location, memories, and photos on social media via the free DiverLog+ app on your smartphone (for iOS and Android).
• Four Operating Modes Dive how you like with Air, Nitrox, Gauge dive modes, plus Free Dive (tracks calculations to allow switching between dive modes and free dive)
• User-Changeable Battery Uses globally available standard batteries found at supermarkets and drugstores so you can easily replace as needed
• Memory Maintains settings and calculations during battery changes
• Intuitive Navigation Single-button access to last dive data (maximum depth and bottom time)
• Well Lit Easy reading in low light conditions
• Increased Safety Audible alarms and additional high-visibility LED warning light
• 3 Gas Computer Able to switch up to three gases underwater
• Updatable software User-updatable software gives you long-term access to the latest features and upgrades via Bluetooth connection
• Water Activation Water activation feature gives you a worry-free start to your dive
• History Mode History Mode lets you see your total dives, maximum depth, total dive hours, and lowest temperature. Records up to 24 dives
• Nitrox Mix Capability Up to 100% O2. Mix up to 2 Nitrox gases
• Deep Stop Optional deep stop with countdown timer
• Go Anywhere Salt or freshwater dive selection
• Altitude Adjustment Automatic altitude adjustment ensures an accurate profile

Included in the Box

• Digital Instruction Manual
• Safety Reference Information
• DiverLog Brochure
• Quick Reference Card
• Lens Protector
• Battery Compartment Opening Tool

Features

• Stay Connected After your dive, Bluetooth connectivity lets you share your stats, location, memories, and photos on social media via the free DiverLog+ app on your smartphone (for iOS and Android).
• Four Operating Modes Dive how you like with Air, Nitrox, Gauge dive modes, plus Free Dive (tracks calculations to allow switching between dive modes and free dive)
• User-Changeable Battery Uses globally available standard batteries found at supermarkets and drugstores so you can easily replace as needed
• Memory Maintains settings and calculations during battery changes
• Intuitive Navigation Single-button access to last dive data (maximum depth and bottom time)
• Well Lit Easy reading in low light conditions
• Increased Safety Audible alarms and additional high-visibility LED warning light
• 3 Gas Computer Able to switch up to three gases underwater
• Updatable software User-updatable software gives you long-term access to the latest features and upgrades via Bluetooth connection
• Water Activation Water activation feature gives you a worry-free start to your dive
• History Mode History Mode lets you see your total dives, maximum depth, total dive hours, and lowest temperature. Records up to 24 dives
• Nitrox Mix Capability Up to 100% O2. Mix up to 2 Nitrox gases
• Deep Stop Optional deep stop with countdown timer
• Go Anywhere Salt or freshwater dive selection
• Altitude Adjustment Automatic altitude adjustment ensures an accurate profile

Included in the Box

• Digital Instruction Manual
• Safety Reference Information
• DiverLog Brochure
• Quick Reference Card
• Lens Protector
• Battery Compartment Opening Tool

• Three Operating Modes Dive how you like with Air, Nitrox, Gauge dive modes, plus Free Dive (tracks calculations to allow switching between dive modes and free dive)
• User-Changeable Battery & Data Retention Maintains settings and calculations between battery changes
• Blue-tooth Data Transfer Connect to your smartphone via DiverLog+ app to remotely control your computer settings as well as store and share dive log information
• Gas-Integrated Tank pressure is easy to read in the large face screen. Our patented Gas Time Remaining Algorithm provides calculations in real-time, maintaining accurate gas management
• Intuitive Navigation Single-button access to last dive data (maximum depth and bottom time)
• Well Lit Easy reading in low light conditions
• Increased Safety Audible alarms and additional high-visibility LED warning light
• Updatable software User-updatable software gives you long-term access to the latest features and upgrades via Bluetooth connection
• Water Activation Water activation feature gives you a worry-free start to your dive
• History Mode History Mode lets you see your total dives, maximum depth, total dive hours, and lowest temperature. Records up to 24 dives
• Nitrox Mix Capability Up to 100% O2
• Deep Stop Optional deep stop with countdown timer
• Go Anywhere Salt or freshwater dive selection
• Altitude Adjustment Automatic altitude adjustment ensures an accurate profile

What's in the Box:

• i550C Dive Computer
• Digital Instruction Manual
• Paper Safety Reference
• Diverlog Brochure
• Quick Reference Card
• Lens Protector (Installed)

• Fast Valve Response Our patented Impulse Dry valve faces forward so that it closes faster. This prevents water from entering and eliminates the need to clear it.
• High Performance The excellent performance of the hydrodynamic new barrel and improved valve design have been validated through extensive Ansti testing.
• Self-Draining Easily switch from scuba back to snorkel: the self-draining purge valve prevents water entry.
• Easily Connects to Mask Push-button, two-piece connector allows you to easily attach and remove the snorkel from your mask strap.
• Eliminates Jaw Fatigue Our patented Comfo-Bite™ mouthpiece does not necessitate clenching your teeth, reducing fatigue, even after hours of adventure. Mouthpieces are replaceable.
• Easily Switch to Regulator The flex section allows for easy positioning and will drop away when not in use.

First Stage: When the first stage is not connected to a cylinder valve, the Auto Closure Device (ACD) keeps the inlet shut to protect the first stage internal parts from contamination and corrosive water. Preserves the internal lubrication. Keeps the inlet filter clean and dry. Safer for elevated percentages of oxygen. Exceptional cold-water performance is achieved by modernizing Aqua Lung's three anti-freeze properties: Where there's no moisture, there's no ice. The LEG3ND's integrated dry chamber keeps inner components clean and dry by isolating them from the outside environment. Deep ribs create a large heat exchange surface area that helps to prevent ice forming on the mechanism (+30% vs Glacia / +70% vs Legend 2). The new overmolded cap delays ice forming over the external diaphragm. Auto-Balanced (also known as Over-Balanced) Progressive increase of the working pressure to maintain optimum breathing efforts: Depending on the diver's depth, the working pressure of the first stage is automatically elevated to counteract the increased breathing air density. Ergonomically shaped DIN and YOKE screws made of a bi-material “Soft Grip” surface provide a better hold when installing or removing the first stage – especially with cold hands. Channeled YOKE screw to prevent water retention. Specialized ACD Dust cap attached to the regulator body to protect the inlet fitting and the ACD system from impacts or damage. Perfectly positioned HP and MP ports provide optimal hose routing.

Second Stage: New front cover opening channels allow water to flow sideways over the diaphragm. Radial openings to prevent freeflows when diving in stronger currents. Openings widened to reduce peak inspiratory flow by an impressive 20%. New overmolded exhaust cover made of elastomer with a “soft touch” effect. Overmolded air purge: Wide surface area makes regulator purging easier. Purge depth controller optimizes air flow with minimal effort. Patented Comfobite mouthpiece reduces jaw fatigue and secures the second stage more comfortably. Detachable and reusable mouthpiece clamp allows a quick and simple tool-free mouthpiece change without plastic waste. The enlarged heat exchanger helps to prevent freezing of the second stage mechanism. Air channel deflector: Directs the air flow evenly during the inhalation phase. Streamlined bi-material deflector lowers the exhalation effort Flexible and lightweight Aqua Flex hose with dual protectors.

Free Parts for Life Program (Regulator Service Agreement)

The Free Parts for Life Program allows the customer to receive free parts when the regulator is due for overhaul. Free parts consist of the normal replacement items as found in the Regulator 1st & 2nd Stage Service Kits. Labor charges are not covered. Assuming the program guidelines are followed, the Free Parts for Life Program will apply to the life of the regulator and will significantly reduce the cost of ownership. This program is in addition to the standard product warranties outlined in the owner’s manual. The Free Parts for Life Program is a commitment by you (the Regulator owner), your Aqua Lung Dealer and Aqua Lung. To participate, you must be the original owner and have purchased the regulator from an Authorized Aqua Lung or Apeks America Dealer. The regulator must be brought to an Authorized Dealer at least once a year for inspection or overhaul according to the below schedule:

Year #1: Inspection

Year #2: Overhaul

Year #3: Inspection

Year #4: Overhaul

Year #5: Etc.

To keep the Free Parts for Life Program active, both inspections and overhauls need to be documented in the Annual Service & Inspection Record included in the Owner’s Manual CD or the Record can be found online. If an inspection or overhaul is missed, the regulator no longer qualifies for the Free Parts for Life program. Visit Water World SCUBA, your local Aqua Lung Dealer, for more information.

Wrapture™ Harness System:

Wrapture™ Harness System: patented swivel shoulder buckles and ultra-thin back plate provide unsurpassed comfort and prevent the BCD from riding up on the surface. Out of the water, the system allows you to stand up straight by keeping the cylinder close to your center of gravity and transferring the weight to your hips

SureLock™ II Weight Release:

Safe, single-pull weight release with patented SureLock™ II Mechanical Weight Release System

HP Hose Routings:

HP hose routings through the back keep your entire kit low profile, minimizing drag

Smooth, Flat Valves:

Proprietary flat valves further reduce drag

Bladder Retraction System:

Bladder retraction system pulls in the sides of the bladder during deflation to keep you streamlined and reduce drag

Adjustable Chest Strap:

Adjustable sliding chest strap can be raised or lowered on a rail system for added comfort. Helps you avoid drysuit valves

Octo Pocket:

Right lobe octo-pocket secures the octopus while keeping it accessible and visible throughout your dive

Additional Dump Option:

Right shoulder pull

Non-Ditchable Weight Pockets:

Located on the back of the BCD, these pockets help you achieve proper positioning in the water

Rolled Neck Collar: Comfortable rolled neck collar

Gear Up! Multiple pockets, D-rings, and knife attachment points make stowing and accessing gear easy

Capacity:

All sizes of the Lotus are capable of holding up to 30lbs/13.5kg of lead weight

BCDs: Aqua Lung America warrants to the original purchaser for a period of time, specified below for each product, from the date of purchase that the product will be free from defects in materials and workmanship, provided that it receives normal use, proper care and prescribed dealer service subject to the limitations listed below. The limited warranty is extended only to the original purchaser for purchases made from an Authorized Aqua Lung America Dealer and is not transferable. This warranty is limited to repair or replacement only at the discretion of Aqua Lung America. Warranty coverage does not extend to damages caused by improper use, improper maintenance, neglect, unauthorized repairs, modifications, accidents, fire, casualty or normal wear and aging. Cosmetic damage(s), such as scratches, nicks and fraying are not covered under warranty except when the product is new, out of the original packaging. This warranty does not extend to equipment used for commercial or military purposes.

Weld/Seam Leaks: Five-Year Limited Warranty *Qualifying Service Records Required

Hardware (Buckles, Zippers, D-Rings, etc.): Two-Year Limited Warranty

1st Stage: Travel-Ready. The reduced size and weight makes the Mikron the ideal choice for travelers. Auto-Closure Device Prevents corrosive water out of the first-stage inlet by automatically closing as the core is removed from the cylinder valve. This prevents internal lubrication from washing away and is safer for higher proportions of oxygen. Yoke or DIN Available in yoke (3,300psi/232 bar max.) or DIN (4,350psi/300 bar max.)

HP/MP Ports and "T" Shape: 2 HP ports (7/16”) and 4 MP ports (3/8”), perfectly oriented in a “T” shape for streamlined hose positioning, reduced exhalation effort, and sending bubbles out of your field of view.

Braided Hose: A braided hose provides flexibility, comfort and excellent transportability.

Standard Aqua Lung Parts: Since it uses standard Aqua Lung components, your local dive shop can more easily service it.

2nd Stage: Pneumatically balanced for smooth, easy breathing. Comfo-Bite Comfo-Bite mouthpiece is soft yet sturdy and reduces jaw fatigue with its unique palate bridge. Optimize Your Opening Effort With the “Mini/Maxi” adjustment knob, you can increase the opening effort, ideal for avoiding freeflow at the surface, or lower the inhalation effort, reducing the work of breathing.

Free Parts for Life Program: (Regulator Service Agreement)

The Free Parts for Life Program allows the customer to receive free parts when the regulator is due for overhaul. Free parts consist of the normal replacement items as found in the Regulator 1st & 2nd Stage Service Kits. Labor charges are not covered. Assuming the program guidelines are followed, the Free Parts for Life Program will apply to the life of the regulator and will significantly reduce the cost of ownership. This program is in addition to the standard product warranties outlined in the owner’s manual. The Free Parts for Life Program is a commitment by you (the Regulator owner), your Aqua Lung Dealer and Aqua Lung. To participate, you must be the original owner and have purchased the regulator from an Authorized Aqua Lung or Apeks America Dealer. The regulator must be brought to an Authorized Dealer at least once a year for inspection or overhaul according to the below schedule:

Year #1: Inspection

Year #2: Overhaul

Year #3: Inspection

Year #4: Overhaul

Year #5: Etc.

To keep the Free Parts for Life Program active, both inspections and overhauls need to be documented in the Annual Service & Inspection Record included in the Owner’s Manual CD or the reecord can be found online. If an inspection or overhaul is missed, the regulator no longer qualifies for the Free Parts for Life program. Visit Water World SCUBA, your local Aqua Lung Dealer, for more information.

Back Inflation BCD:

Uses interchangeable bladder available in 12lb/5L and 25lb/11L lift capacities.

Lightweight:

 Instead of heavy pockets or steel D-rings, the Outlaw travels light with webbed D-rings and a military-style webbed daisy chain for accessory attachment.

Travel-Friendly and Adventure-Ready:

Easy-to-disconnect shoulders and waists; overall weight is <4lb/1.8kg.

GripLock™ Tank Band:

GripLock™ tank band’s finger-saver feature and macro presets create an easy and safe solution for securing and detaching your cylinder.

Additional Dump Option:

Right shoulder pull.

Configurable:

Interchangeable shoulder and waist strap components; standard carabineer can be mounted on either right or left shoulder strap.

Bladder Retraction System:

Bladder retraction system pulls in the sides of the bladder during deflation to keep you streamlined and reduce drag.

Optional:

SureLock™ II Weight Release: Safe, single-pull weight release with patented SureLock™ II. 

Mechanical Weight Release System.

Trim pockets (5lbs/2.25kg). 

Aqua Lung America warrants to the original purchaser for a period of time, specified below for each product, from the date of purchase that the product will be free from defects in materials and workmanship, provided that it receives normal use, proper care and prescribed dealer service subject to the limitations listed below. The limited warranty is extended only to the original purchaser for purchases made from an Authorized Aqua Lung America Dealer and is not transferable. This warranty is limited to repair or replacement only at the discretion of Aqua Lung America. Warranty coverage does not extend to damages caused by improper use, improper maintenance, neglect, unauthorized repairs, modifications, accidents, fire, casualty or normal wear and aging. Cosmetic damage(s), such as scratches, nicks and fraying are not covered under warranty except when the product is new, out of the original packaging. This warranty does not extend to equipment used for commercial or military purposes.

BCDs: Weld/Seam Leaks: Five-Year Limited Warranty *Qualifying Service Records Required".

           Hardware (Buckles, Zippers, D-Rings, etc.): Two-Year Limited Warranty

Hybrid Jacket: 

ADV-style jacket combined with back inflation unit gives you the best of both worlds: a streamlined profile during your dive and the ability to float comfortably at the surface.

SureLock™ II Weight Release:

Safe, single-pull weight release with patented SureLock™ II Mechanical Weight Release System.

Octo Pockets:

Two octo-pocket locations for versatility: right lobe and top of front lobe.

Smooth, Flat Valves:

Proprietary flat valves further reduce drag.

Adjustable Chest Strap:

Adjustable sliding chest strap can be raised or lowered on a rail system for added comfort. Helps you avoid drysuit valves.

Gear Up!

Multiple pockets, D-rings, and knife attachment points make stowing and accessing gear easy.

Aqua Lung America warrants to the original purchaser for a period of time, specified below for each product, from the date of purchase that the product will be free from defects in materials and workmanship, provided that it receives normal use, proper care and prescribed dealer service subject to the limitations listed below. The limited warranty is extended only to the original purchaser for purchases made from an Authorized Aqua Lung America Dealer and is not transferable. This warranty is limited to repair or replacement only at the discretion of Aqua Lung America. Warranty coverage does not extend to damages caused by improper use, improper maintenance, neglect, unauthorized repairs, modifications, accidents, fire, casualty or normal wear and aging. Cosmetic damage(s), such as scratches, nicks and fraying are not covered under warranty except when the product is new, out of the original packaging. This warranty does not extend to equipment used for commercial or military purposes.

BCDs: Weld/Seam Leaks: Five-Year Limited Warranty *Qualifying Service Records Required".

           Hardware (Buckles, Zippers, D-Rings, etc.): Two-Year Limited Warranty

• Easy-to-read scale up to 5,000 PSI / 350 bar rated 
• Luminescent gauge face for easy reading in low light
• Integrated temperature scale
• Nitrox compatible up to 50%
• Swiss made, shock resistant Bourdon tube
• One way safety valve
• Hose length is 36"/ 91.44cm

Options:

• Available in imperial or metric

SureLock™ II Weight Release:

Safe, single-pull weight release with patented SureLock™ II Mechanical Weight Release System.

ResisteK Material:

Looks good, and stays that way: made of new, technologically advanced ResisteK™ material to resist fading and abrasion in saltwater and chlorine.

Backpack Handle:

Easy to carry: proprietary backpack has built-in handle.

Your Height Is Right:

Positioning strap lets you set the preferred height each time.

Your Weight Is Great:

Adjustable waistband to accommodate a wide range of sizes.

Tank Band Pockets:

Fixed pockets on the tank band to increase weight capacity and help provide proper trim in the water.

Large Pull Bobs:

Easy to find and grip while wearing thick gloves.

Configurable:

Some divers may prefer to run their instruments behind the left pocket and out the scooped opening on top, in front of the lobe.

Utility Pockets:

Easy-access utility pockets have two-way zippers with zipper pulls.

Smooth, Flat Valves:

Proprietary flat valves further reduce drag.

Octo Pocket:

Scooped octo-pocket.

Adjustable Chest Strap:

Adjustable sliding chest strap can be raised or lowered on a rail system for added comfort. Helps you avoid drysuit valves.

Gear Up!

Multiple pockets, D-rings, and knife attachment points make stowing and accessing gear easy. 

Aqua Lung America warrants to the original purchaser for a period of time, specified below for each product, from the date of purchase that the product will be free from defects in materials and workmanship, provided that it receives normal use, proper care and prescribed dealer service subject to the limitations listed below. The limited warranty is extended only to the original purchaser for purchases made from an Authorized Aqua Lung America Dealer and is not transferable. This warranty is limited to repair or replacement only at the discretion of Aqua Lung America. Warranty coverage does not extend to damages caused by improper use, improper maintenance, neglect, unauthorized repairs, modifications, accidents, fire, casualty or normal wear and aging. Cosmetic damage(s), such as scratches, nicks and fraying are not covered under warranty except when the product is new, out of the original packaging. This warranty does not extend to equipment used for commercial or military purposes.

BCDs: Weld/Seam Leaks: Five-Year Limited Warranty *Qualifying Service Records Required".

           Hardware (Buckles, Zippers, D-Rings, etc.): Two-Year Limited Warranty

ModLock™ Connectors:

ModLock™ connectors allow for quick and easy changing of the components so you can set back, shoulder, and waist sizes individually. Connectors click into place and are easily opened with any small tool, such as a pen or key.

Minimalist, Not Minimized:

No-fuss design retains essential features: pockets, stainless steel D-rings, octo holder, knife attachment point.

Personalized Fit:

Easy-to-disconnect and reattach shoulders and waists.

Lightweight:

Overall weight: <5lb/2.2kg.

Back Inflation:

35lb/15L lift capacity.

GripLock™ Tank Band:

GripLock™ tank band’s finger-saver feature and macro presets create an easy and safe solution for securing and detaching your cylinder.

Bladder Retraction System:

Bladder retraction system pulls in the sides of the bladder during deflation to keep you streamlined and reduce drag.

Dumping Options:

Upper and lower right pull dump.

SureLock™ II Weight Release:

Safe, single-pull weight release with patented SureLock™ II Mechanical Weight Release System.

Webbed Daisy Chain:

Military-style webbed daisy chain for accessory attachment.

Optional:

Trim pockets (3lb/1.5kg).

Soul - SMB pocket.

Waistband extender.

Aqua Lung America warrants to the original purchaser for a period of time, specified below for each product, from the date of purchase that the product will be free from defects in materials and workmanship, provided that it receives normal use, proper care and prescribed dealer service subject to the limitations listed below. The limited warranty is extended only to the original purchaser for purchases made from an Authorized Aqua Lung America Dealer and is not transferable. This warranty is limited to repair or replacement only at the discretion of Aqua Lung America. Warranty coverage does not extend to damages caused by improper use, improper maintenance, neglect, unauthorized repairs, modifications, accidents, fire, casualty or normal wear and aging. Cosmetic damage(s), such as scratches, nicks and fraying are not covered under warranty except when the product is new, out of the original packaging. This warranty does not extend to equipment used for commercial or military purposes.

BCDs: Weld/Seam Leaks: Five-Year Limited Warranty *Qualifying Service Records Required".

           Hardware (Buckles, Zippers, D-Rings, etc.): Two-Year Limited Warranty

Hybrid Jacket:

ADV-style jacket combined with back inflation unit gives you the best of both worlds: a streamlined profile during your dive and the ability to float comfortably at the surface.

Wrapture™ Harness System:

Wrapture™ Harness System: patented swivel shoulder buckles and ultra-thin back plate provide unsurpassed comfort and prevent the BCD from riding up on the surface. Out of the water, the system allows you to stand up straight by keeping the cylinder close to your center of gravity and transferring the weight to your hips.

Oral Inflator:

Easy-to-use pull-down oral inflator.

GripLock™ Tank Band:

GripLock™ tank band’s finger-saver feature and macro presets create an easy and safe solution for securing and detaching your cylinder.

SureLock™ II Weight Release:

Safe, single-pull weight release with patented SureLock™ II Mechanical Weight Release System.

Bladder Retraction System:

Bladder retraction system pulls in the sides of the bladder during deflation to keep you streamlined and reduce drag.

Additional Dump Option:

Right shoulder pull.

Rolled Neck Collar:

Comfortable rolled neck collar.

Adjustable Chest Strap:

Adjustable sliding chest strap can be raised or lowered on a rail system for added comfort. Helps you avoid drysuit valves.

Octo Pocket:

Scooped octo pocket.

Gear Up!

Multiple pockets, D-rings, and knife attachment points make stowing and accessing gear easy.

Aqua Lung America warrants to the original purchaser for a period of time, specified below for each product, from the date of purchase that the product will be free from defects in materials and workmanship, provided that it receives normal use, proper care and prescribed dealer service subject to the limitations listed below. The limited warranty is extended only to the original purchaser for purchases made from an Authorized Aqua Lung America Dealer and is not transferable. This warranty is limited to repair or replacement only at the discretion of Aqua Lung America. Warranty coverage does not extend to damages caused by improper use, improper maintenance, neglect, unauthorized repairs, modifications, accidents, fire, casualty or normal wear and aging. Cosmetic damage(s), such as scratches, nicks and fraying are not covered under warranty except when the product is new, out of the original packaging. This warranty does not extend to equipment used for commercial or military purposes.

BCDs: Weld/Seam Leaks: Five-Year Limited Warranty *Qualifying Service Records Required".

           Hardware (Buckles, Zippers, D-Rings, etc.): Two-Year Limited Warranty

First Stage:  Balanced Diaphragm. The balanced diaphragm mechanism allows for ease of breathing and consistent performance while protecting internal moving parts from the environment. Lightweight Construction The Titan’s unique forged body uses less brass, making it more compact and lighter weight than other regulators. Polyurethane Purge Cover Rugged, durable polyurethane purge cover is abrasion-resistant, tear-resistant, minimizes inhalation effort, allows easy water purging, and helps protect against shock. HP/MP Ports and "T" Shape 2 HP ports (7/16”) and 4 MP ports (3/8”), perfectly oriented in a “T” shape for streamlined hose positioning, reduced exhalation effort, and sending bubbles out of your field of view. Water Retention Open-yoke screw helps prevent water retention.

Second Stage: Comfo-Bite mouthpiece is soft yet sturdy and reduces jaw fatigue with its unique palate bridge. Reusable Clip: Perform quick and easy mouthpiece changes using the removable, reusable clip. Clipped Deflector: Simple maintenance made possible by a reduced number of components and easy access to the exhaust valve through a clipped deflector. Deflector also splits up bubbles to decrease noise and protect the valve from expiration. Venturi Knob Easy control: the in-line ergonomic Venturi knob lets you make precise adjustments, even while wearing gloves. Polyurethane Purge Cover: Rugged, durable polyurethane purge cover is abrasion-resistant, tear-resistant, minimizes inhalation effort, allows easy water purging, and helps protect against shock. Material Strength: Made of strong polycarbonate. 

Free Parts for Life Program (Regulator Service Agreement)

The Free Parts for Life Program allows the customer to receive free parts when the regulator is due for overhaul. Free parts consist of the normal replacement items as found in the Regulator 1st & 2nd Stage Service Kits. Labor charges are not covered. Assuming the program guidelines are followed, the Free Parts for Life Program will apply to the life of the regulator and will significantly reduce the cost of ownership. This program is in addition to the standard product warranties outlined in the owner’s manual. The Free Parts for Life Program is a commitment by you (the Regulator owner), your Aqua Lung Dealer and Aqua Lung. To participate, you must be the original owner and have purchased the regulator from an Authorized Aqua Lung or Apeks America Dealer. The regulator must be brought to an Authorized Dealer at least once a year for inspection or overhaul according to the below schedule:

Year #1: Inspection

Year #2: Overhaul

Year #3: Inspection

Year #4: Overhaul

Year #5: Etc.

To keep the Free Parts for Life Program active, both inspections and overhauls need to be documented in the Annual Service & Inspection Record included in the Owner’s Manual CD or the Record can be found online. If an inspection or overhaul is missed, the regulator no longer qualifies for the Free Parts for Life program. Visit Water World SCUBA, your local Aqua Lung Dealer, for more information.